Posts in Category: SOLD
Vintage Cast Iron Amish Man On His Work Bench Door Stop Doorstop Or Book End
You are buying a vintage cast iron Amish man Sitting on his work bench that
I have posted in my Ebay Store.
This can be used as a door stop or book end.
It is about 3.75″ wide x 4.75″ tall.
There is a felt pad on the bottom to protect your furniture.
It has some minor paint loss but is otherwise in great shape. See all pictures as part of the description.
Teleflex Morse Sahara 7000 RPM I/O Boat Tachometer Gauge 59703P Signature Series
You are buying a new illuminated Teleflex Sahara inboard/outboard 7000 RPM tachometer, that I have posted in my Ebay Store mfg. part #59703.
Set up for 4/6/8 cylinder inboards and 2/3/4/5/6 pulse outboards (works with 12 pole outboards).
Features domed lens, black bezel, tan face, black numerals and lettering and black with orange tip needle.
Measures approx. 3 3/4″ across including bezel and uses a 3 1/4″ cutout.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Josef Wagner Brunn Tin Horse Carousel Wind Up Toy Germany JW Blechspielzeug 2002
You are buying a mechanical tin carousel I have posted in my Ebay Store.
This wind up carousel was made in 2002 by Wagner/Brunn.
It was made in Germany.
The base is approximately 6 1/2 inches (16 1/2 cm) from one point to the opposite point.
Measured from one flat side of the base to the opposite flat side is just under 6 inches (15 cm).
From the base to the top of the brass ball on the top it is approximately 7 1/2 inches (19 cm) tall.
This is a reproduction of an older vintage model. It has a great vintage look with colorful graphics.
Though it is in used condition it still works great. You just slide the lever to the right and release and the carousel spins around.
This is not a child’s toy and is not recommended for children 8 and under.
There are two minor scratches on the top canopy. See next to last picture. Please view all pictures as they are part of the description.
Kobe Charlton Hall Rocking Horse Ceramic Trivet in Hanging Wooden Frame Festive
You are buying a Charlton Hall by Kobe ceramic tile trivet that I have posted in my Ebay Store.
Your trivet features a rocking horse in the center with french horns adorning the corners and is edged with gorgeous white poinsettias.
It is attached inside a wood frame. You may use it on the Christmas dinner table holding your favorite dish.
There is also a ring on the back so you can hang it as holiday decoration on your kitchen wall if you so choose.
The tile is a little over 7 3/4″ x a little over 7 3/4″ across. The frame is about 9 1/2″ x about 9 1/2″ across and a little over 1/2″ thick.
It is in great condition.
Midwest Santa Reindeer Sleigh Cast Iron Double Hook Xmas Stocking Holder Hanger
You are buying St Nick’s Sleigh Ride double stocking holder by Midwest Importers of Cannon Falls that I have posted in my Ebay Store.
This Christmas stocking hanger holds two stockings.
In very good Vintage condition.
Stands approximately 4.25″ tall (not including hook) x 6.5″ wide x 2.25″ deep (once again without the hook).
It is a heavier piece at nearly 3 lbs as it is solid cast iron. There is lots of beautiful detail in it.
Midwest has retired this model long ago, so it is hard to find!
It comes in it’s original box which shows wear from many years of use. See all of the pictures.
Having a rubber skid protector insures that it will protect your mantle or furniture.
Solid Brass Christmas Tree Stocking Holder Hook 6.5″ tall Heavy In Original Box
You are buying a solid brass Christmas Tree stocking holder from 1999 that I have posted in my Ebay Store. They are in the shape of a curled hook.
Your stocking hanger measures approximately 6.5″ tall X 5.5″ wide. With the hook it is 8.25″ long.
It is heavy, weighing more than 1.5 pounds and comes in it’s original box.
This is a Home For The Holidays stocking hanger from Santa’s Workshop.
The style # is 19001 and was distributed in 1999 by the May Department Store Company.
Solid Brass Christmas Star Stocking Holder Hook 5.5″ tall Heavy In Original Box
You are buying a solid brass Christmas Star stocking holder from 1999 that I have posted in my Ebay Store. It is in the shape of a curled hook.
Your stocking hanger measures approximately 5.5″ tall X 5.5″ wide. With the hook it is 8.25″ long.
It is heavy, weighing more than 1.5 pounds and comes in it’s original box.
This is a Home For The Holidays stocking hanger from Santa’s Workshop.
The style # is 19001 and was distributed in 1999 by the May Department Store Company.
Pair Vintage Pewter Trumpeter Angel And Christmas Tree Stocking Holders Hangers
You are buying a pair of decorative silver tone or pewter Christmas Tree and Trumpeting Angel Stocking Holders I have posted in my Ebay Store.
These are very unique silver colored ornate stocking hangers.
They feature a Christmas Tree that has musical instruments, doves, bells etc. as ornaments decorating the tree and a nicely detailed angel sounding her trumpet.
They are heavy and solid, with rubber backing on bottom to keep from slipping.
The measurements are approximately 6.5″ tall x 4.5″ wide by 3.5″ x 2.25″ base.
These Stocking Hangers are in excellent pre-owned condition.
3 Vintage Davco Silver Ltd Gift Box Candle Holders 1 Godinger Gift Box Ornament
Please click here to see the new listing.
Merry Christmas!
Williraye Studio WW2301 Girl Holding A Cat And Basket
You are buying a pre-owned Williraye Studio Christmas figure created in 1997 named Cousins Girl I have posted in my Ebay Store. She is holding a cat in one hand and a fruit basket in the other hand.
This gal is ready for the blustery winter day with her basket full of goodies and her cat!
The Manufacturers Item Number is WW2301.
She measures approximately 6 1/2 inches by 3 inches by 2 1/2 inches.
The condition is excellent.
If you are familiar with Williraye, you understand they are rather heavy in weight.
The box has some storage wear to it. Please view ALL pics.
This Sculpture was issued 1997 and was retired in 1998
